-40%

BERNZOMATIC 14.1oz. MAP-Pro Disposable RTU High Heat Brazing Torch Fuel Cylinder

$ 11.08

Availability: 34 in stock
  • Custom Bundle: No
  • Condition: New
  • Brand: Bernzomatic
  • California Prop 65 Warning: This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • All returns accepted: ReturnsNotAccepted
  • MPN: 332477
  • Country/Region of Manufacture: United States
  • Modified Item: No
  • Item Type: Fuel Cylinder
  • Gas Type: Map-Pro

    Description

    The Bernzomatic® 14.1 oz MAP-Pro® Hand Torch Cylinder enables you to complete tasks faster and more efficiently using a higher burn temperature than standard propane. MAP-Pro is premium fuel suited for a variety of job site projects including soldering large copper pipes, brazing and heat treating. The durable steel cylinder is the slim and lightweight for easy gripping and maneuvering. This product is compatible with our Digital Fuel Gauge to easily measure how much fuel is remaining in the cylinder. MAP-Pro fuel has an in-air flame temperature of 3,730 degrees Fahrenheit. This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
    BERNZOMATIC 14.1oz. MAP-Pro Disposable RTU High Heat Brazing Torch Fuel Cylinder
    The Bernzomatic® 14.1 oz MAP-Pro® Hand Torch Cylinder enables you to complete tasks faster and more efficiently using a higher burn temperature than standard propane. MAP-Pro is premium fuel suited for a variety of job site projects including soldering large copper pipes, brazing and heat treating. The durable steel cylinder is the slim and lightweight for easy gripping and maneuvering. This product is compatible with our Digital Fuel Gauge to easily measure how much fuel is remaining in the cylinder. MAP-Pro fuel has an in-air flame temperature of 3,730 degrees Fahrenheit. This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
    The Bernzomatic® 14.1 oz MAP-Pro® Hand Torch Cylinder enables you to complete tasks faster and more efficiently using a higher burn temperature than standard propane. MAP-Pro is premium fuel suited for a variety of job site projects including soldering large copper pipes, brazing and heat treating. The durable steel cylinder is the slim and lightweight for easy gripping and maneuvering. This product is compatible with our Digital Fuel Gauge to easily measure how much fuel is remaining in the cylinder. MAP-Pro fuel has an in-air flame temperature of 3,730 degrees Fahrenheit. This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
    The Bernzomatic® 14.1 oz MAP-Pro® Hand Torch Cylinder enables you to complete tasks faster and more efficiently using a higher burn temperature than standard propane. MAP-Pro is premium fuel suited for a variety of job site projects including soldering large copper pipes, brazing and heat treating. The durable steel cylinder is the slim and lightweight for easy gripping and maneuvering. This product is compatible with our Digital Fuel Gauge to easily measure how much fuel is remaining in the cylinder. MAP-Pro fuel has an in-air flame temperature of 3,730 degrees Fahrenheit. This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
    The Bernzomatic® 14.1 oz MAP-Pro® Hand Torch Cylinder enables you to complete tasks faster and more efficiently using a higher burn temperature than standard propane. MAP-Pro is premium fuel suited for a variety of job site projects including soldering large copper pipes, brazing and heat treating. The durable steel cylinder is the slim and lightweight for easy gripping and maneuvering. This product is compatible with our Digital Fuel Gauge to easily measure how much fuel is remaining in the cylinder. MAP-Pro fuel has an in-air flame temperature of 3,730 degrees Fahrenheit. This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
    It is buyers responsibility to read full description and included safety information before purchasing. Seller is not responsible for any incidents involving this item. Improper use can result in injury or death.
    Product
    must be used in a well ventilated area due to the accumulation of carbon monoxide, this unseen and odorless gas is deadly
    in
    small
    amounts
    .
    *Product labeling may have slight variations from listing images. Guaranteed to be authentic Bernzomatic MAP-PRO FUEL
    Great for Brazing Steel, Removing rusted Bolts and Soldering large diameter copper pipes and many other applications
    .
    Product Overview
    Flame temperature in air of 3,730° F/2054.4° C
    Faster heat transfer than propane fuel
    Durable steel construction
    Model#: 332477
    Sku#: 602226
    Internet#: 203226566
    Work faster and more efficiently with a higher burn temperature than standard propane. The Bernzomatic MAP-Pro Hand Torch Cylinder contains premium fuel suited for a variety of job site projects including soldering large copper pipes, brazing and heat treating. Constructed of durable steel, the slim, lightweight cylinder is easy to grip and maneuver. Flame temperature in air is 3,730 degrees Fahrenheit.
    Flame temperature in air of 3,730° F / 2054.4° C, ideal for medium to heavy soldering and brazing
    Faster heat transfer than propane fuel
    Slim, lightweight cylinder is easy to grip and maneuver
    Durable steel construction
    Technical Specifications
    Product Identifier: Max Power Propylene (Odorized)
    Synonyms: Methyl ethylene, Propane
    Chemical Family: Olefins
    Chemical Formula: C3H6
    Application and Use: Multi-purpose fuel or chemical feedstock
    Product Description: Colorless, Hydrocarbon odor composed, stored and handled as liquids under pressure DOT Hazard Class: Flammable Gas
    C.A.S. Number: 115-07-1
    UN 1077
    -HEALTH HAZARD INFORMATION NATURE OF HAZARD
    INHALATION:
    May cause central nervous system disorder (e.g. loss of coordination, weakness, fatigue, mental confusion and blurred vision) and/or damage.
    Breathing high vapor concentrations (saturated vapors) for a few minutes may be fatal. Saturated vapors can be encountered in confined spaces and/or under conditions of poor ventilation.
    May cause irritation, breathing failure, coma and death without any warning odor being sensed.
    Inhalation exposure to this product at extremely high concentrations, as in accidental releases in which concentrations reach or exceed the flammable range, may result in cardiac arrhythmias.
    EYE CONTACT:
    Vapors may cause a slight irritation and liquid contact with the eye may cause blindness.
    SKIN CONTACT:
    Exposure to rapidly expanding gas or vaporizing liquid may cause frostbite (cold burns)
    INGESTION:
    Not considered to be a hazard
    INHALATION:
    Exposure to low concentrations may result in a mild anesthetic action. Only exposures to extremely high concentrations will result in physiological effects.
    SYSTEMIC AND OTHER EFFECTS:
    In human studies, propylene at very high concentrations has caused tearing, coughing, and vomiting.
    CARCINOGENICITY:
    No evidence has been listed by the NTP and is listed by the IARC as “not classifiable as to its’ carcinogenicity to humans”.
    TERATOLOGY:
    No evidence.
    REPRODUCTIVE EFFECTS:
    No evidence has been listed.
    -FIRST AID MEASURES
    INHALATION:
    In emergency situations use proper respiratory protection to immediately remove the affected victim from exposure. Administer artificial respiration if breathing has stopped. Keep at rest. Call for prompt medical attention.
    EYE CONTACT:
    In case of cold burns caused by rapidly expanding gas or vaporizing liquid, get prompt medical attention.
    SKIN CONTACT:
    In case of cold burns caused by rapidly expanding gas or vaporizing liquid, get prompt medical attention.
    INGESTION:
    Do NOT induce vomiting if liquid propylene has been swallowed. Seek immediate medical attention.
    -PREVENTITIVE AND CORRECTIVE MEASURES
    PERSONAL PROTECTION:
    The selection of personal protective equipment varies, depending upon conditions of use. In open systems where contact is likely, wear gas-proof goggles, face shield, chemical resistant overalls, and appropriate thermal/chemical gloves. Where skin and eye contact is unlikely, but may occur as a result of short and/or periodic exposures, wear long sleeves, chemical resistant gloves, gas-proof goggles, and a face shield.
    Where concentrations in air may exceed the occupational exposure limits given in Section 4 and where engineering, work practices or other means of exposure reduction are not adequate, approved respirators may be necessary to prevent overexposure by inhalation.
    ENGINEERING CONTROLS:
    The use of local exhaust ventilation is recommended to control emissions near the source. Laboratory samples should be handled in a fume hood. Provide mechanical ventilation of confined spaces. Use explosion-proof ventilation equipment.
    HANDLING, STORAGE AND SHIPPING:
    Keep containers closed. Handle and open containers with care.
    Store in a cool, well-ventilated place away from incompatible materials. Store as pressurized liquid in a pressure vessel. Store and load the container at normal (up to 38 deg C) temperature and at atmospheric pressure.
    Material will accumulate static charges which may cause a spark. Static charge build-up could become an ignition source, Use proper relaxation and grounding procedures.
    Empty containers may contain product residue. Do not pressurize, cut, heat or weld empty container. Do not reuse empty containers without commercial cleaning or reconditioning.
    LAND SPILL:
    Eliminate source of ignition. Keep away, Prevent additional discharge of material, if possible to do so without hazard. Vapors or dust may be harmful or fatal. Warn occupants of downwind areas.
    Allow to evaporate.
    Consult an expert on disposal of recovered material. Ensure disposal in compliance with government requirements and ensure conformity to local disposal regulations. Notify the appropriate authorities immediately.
    Take all additional action necessary to prevent and remedy the adverse effects of the spill.
    WATER FILL:
    Eliminate source of ignition. Vapors or dust may be harmful or fatal. Warn occupants and shipping in downwind area. Allow to evaporate from surface.
    Consult an expert on disposal of recovered material. Ensure disposal in compliance with government requirements and ensure conformity to local disposal regulations. Notify the appropriate authorities immediately.
    Take all additional action necessary to prevent and remedy the adverse effects of the spill.
    -FIRE AND EXPLOSION HAZARD
    Flashpoint: -162 deg F
    Auto ignition: 860 deg F (460 deg C) Flammable Limits: LEL 2.0% UEL 11.1%
    GENERAL HAZARDS:
    Extremely flammable: material will readily ignite at normal temperatures.
    Flammable Gas: may readily form flammable mixtures at or above the flash point.
    Toxic gases will form upon combustions.
    Static Discharge: material may accumulate static charges which may cause a fire.
    Auto-refrigeration: drains may become plugged and valves may become inoperable because of the formation of ice due to expanding vapors or vaporizing liquids.
    FIRE FIGHTING:
    Use water spray to cool fire exposed surfaces and to protect personnel.
    Shut off fuel to fire if possible to do so without hazard. If a leak or spill has not ignited use water spray to disperse the vapors. Do not extinguish flames at leak because possibility of uncontrolled explosive re-ignition exists. Cut off fuel and/or allow fire to burn out.
    Extinguish small residual fires with dry chemical powder or water spray.
    Try to cover liquid spills with foam.
    Respiratory and eye protection required for fire fighting personnel.
    A self-contained breathing apparatus (SCBA) should be used for all indoor fires and any significant outdoor fires. For small outdoor fires, which may easily be extinguished with a portable fire extinguisher, use of a SCBA may not be required.
    HAZARDOUS COMBUSTION PRODUCTS:
    Smoke, carbon monoxide, carbon dioxide under thermal decomposition.
    Refunds
    Shipping
    Authenticity
    Return, Exchange and Refund Policy
    We stand behind every product we sell. If you're not pleased with your purchase, we'll be happy to make an exchange or a refund of the product price less Shipping & handling within 30 days of receipt of your purchase.
    Only regular priced items may be refunded/returned/exchanged, unfortunately sale or clearance items cannot be returned/refunded/exchanged.
    For any exchange or refund, we need the original receipt or a record of the purchase in our system, and the product must be in its original condition, including the box, UPC barcode, packaging, and all accessories.
    Please contact us before returning an item to get a RMA number. Any return without a RMA number will not be accepted or processed.
    You will need to attach a prepaid return shipping label to the package and mail it to the address on the shipping label.
    You will not need to pay for shipping.
    You must take care to ensure that the goods are properly packaged so that they will not be damaged while in transit. If the product is found damaged or used beyond what it takes for us to reasonably inspect it, then we may reject an exchange.
    All returns should be accompanied with a tracking or delivery confirmation number back to our warehouse.
    Shipping and handling charges are non refundable. A 20% restocking fee will be applied to all returns.
    Due to health precautions, we cannot accept returns on Skincare and Hair care products.
    Please allow up to 10 business days for returns to be processed.
    We only process the refund once we receive and inspect the item. If we do not receive the item, unfortunately we cannot issue a refund or process the exchange/refund any further.
    We only process the refund once we receive and inspect the item. If we do not receive the item, unfortunately we cannot issue a refund or process the exchange/refund any further.
    Once a refund is processed it can take 24hrs to 14 days for your financial institution to release the funds back into your account. Once we refund we no longer have any control over that money whatsoever; your financial institution takes over from that point.
    SHIPPING
    We will expedite shipping and/or change the shipping carrier but cost difference will be paid by the buyer at time of purchase
    During checkout you must change to expedited shipping rather than free shipping.
    We ship all orders the next business day. No orders will be shipped out on Saturday or Sunday.
    Once an order is shipped, we will email you a tracking number or it will be updated in eBay system automatically.
    We ship to all USA states including Puerto Rico, Hawaii, Alaska, APO/FPO/DPO and selected international destinations. (Please check shipping and handling tab for country specific details)
    Please make sure you enter the correct shipping address at the checkout. We will not make any changes to the shipping address once you place the order.
    If any shipment is returned due to an error in the shipping address provided to us or due to package not being claimed by the receiver, we will deduct .99 from the purchase price prior to issuing the refund.
    Authenticity Statement:
    All fragrances purchased through Diversified Finds or diversified.finds.store are authentic and in original manufacture packaging unless specified. There are still possible fake and counterfeits that slip through depending on the distributor. There may be differences (rarely, but if so they are minute) because we get these bottles from a closeout wholesaler. These are what you call “Grey Market” bottles. This means that some fragrances were pulled from stock due to but not limited to; decreased sales, to make new space for newer products, they may have had a scuffed packaging/wrapping/box and/or they were needing product rotation. Also, some may have been imported from regions like Turkey, the Middle East, Europe, etc. where they do not sell for nearly as high as they do here in the USA & Canada. This does not mean they are not authentic, they are absolutely authentic. All that is different is the place of origin and not nearly as much markup as here in North America.
    Characteristics that (rarely happen) possibly can seem different are; the scent may have altered ever so slightly, bottle label scuffing or other anomalies most likely do to temperature changes and motion. So please ask about authenticity and have us reassure you before you buy its so much easier. Trust us, were not scamming nor counterfeiting...we are selling the real deal (99.99% of all our bottles of fragrances and designer items are only manufactured by their authentic and licensed facility.).
    In the event that you have concerns simply contact us. Examine your product and compare to the manufactures standards. We will even contact the Designer Brand for their authenticity check (No scammer or counterfeiter would do that) We do not deal with counterfeited items...period!
    By purchasing this item you are agreeing to a legally binding contract with the seller that you have read and fully understand the product listing. This includes reading the description to make sure we meet your expectations.
    Returns are only accepted if the item arrives damaged (we recommend photos or videos to document item was broken at time of opening the box). We want to ensure both you the buyer and us as the seller are protected and aware.
    Videos
    Your browser does not support HTML5 video.
    Your browser does not support HTML5 video.
    New cosmetics...Better Prices
    Check out our newest fragrances for the hottest deals
    Shop Now